產品特點：
1、優質鋼材焊接，擺式刀架，強度高、剛性好；
2、焊后消除內應力,機身整體加工，保證了加工精度；
3、刃口間隙無極調整，輕便快速；
4、后擋料電動調整數字顯示；
5、具有剪切計數定數功能，使用方便；
6、具有燈光照明功能，便于劃線剪切；
7、定制的壓料腳，可以有效保護板料不被壓傷，離刀片較近，便于壓窄料。
技術參數：

QC12Y Series Hydraulic swing beam shearing machine
Specification	Shearing thickness (mm)	Shearing width （mm）	Shearing angler （°）	Number of Stroke （min-1）	Backguage range （mm）	Motor power（KW）
QC12Y/K-4*2500	4	2500	1°30′	20	20-600	4
QC12Y/K -4*3200	4	3200	1°30′	18	20-600	5.5
QC12Y/K -4*4000	4	4000	1°30′	18	20-600	7.5
QC12Y/K -6*2500	6	2500	1°30′	18	20-600	7.5
QC12Y/K -6*3200	6	3200	1°30′	14	20-600	7.5
QC12Y/K -6*4000	6	4000	1°30′	14	20-600	7.5
QC12Y/K -6*5000	6	5000	1°30′	10	20-800	11
QC12Y/K -6*6000	6	6000	1°30′	10	20-800	11
QC12Y/K -8*2500	8	2500	1°30′	14	20-600	7.5
QC12Y/K -8*3200	8	3200	1°30′	10	20-600	7.5
QC12Y/K -8*4000	8	4000	1°30′	8	20-600	7.5
QC12Y/K -8*5000	8	5000	1°30′	7	20-800	11
QC12Y/K -8*6000	8	6000	1°30′	6	20-800	22
QC12Y/K -10*2500	10	2500	1°30′	14	20-800	11
QC12Y/K -10*3200	10	3200	1°30′	12	20-800	11
QC12Y/K -10*4000	10	4000	1°30′	12	20-800	11
QC12Y/K -10*6000	10	6000	2°	10	20-800	15
QC12Y/K -12*2500	12	2500	1°30′	16	20-800	18.5
QC12Y/K -12*3200	12	3200	1°30′	14	20-800	18.5
QC12Y/K -12*4000	12	4000	1°30′	14	20-800	18.5
QC12Y/K -12*5000	12	5000	2°	7	20-1000	30
QC12Y/K -12*6000	12	6000	2°	6	20-1000	37
QC12Y/K -12*8000	12	8000	2°30′	5	20-1000	37
QC12Y/K -16*2500	16	2500	2°	16	20-650	18.5
QC12Y/K -16*3200	16	3200	2°	12	20-800	22
QC12Y/K -16*4000	16	4000	2°	10	20-800	30
QC12Y/K -16*6000	16	6000	2°	8	20-800	30
QC12Y/K -20*2500	20	2500	2°30′	5	20-1000	30
QC12Y/K -20*3200	20	3200	2°30′	4	20-1000	30
QC12Y/K -20*4000	20	4000	2°30′	3	20-1000	37
QC12Y/K -20*6000	20	6000	2°30′	3	20-1000	45
QC12Y/K -25*2500	25	2500	2°30′	6	20-1000	45
QC12Y/K -25*3200	25	3200	2°30′	5	20-1000	45
QC12Y/K -25*4000	25	4000	3°	5	20-1000	45
QC12Y/K -32*2500	32	2500	3°	5	20-1000	55
QC12Y/K -32*3200	32	3200	3°	4	20-1000	55
QC12Y/K -40*2500	40	2500	4°	5	20-1000	75
QC12Y/K -40*3200	40	3200	4°	3	20-1000	90
QC12Y/K -50*3200	50	3200	3°	5	20-1000	90*3
QC12Y/K -50*6000	50	6000	3°	5	20-1000	90*5
QC12Y/K -60*3200	60	3200	3°30′	5		90*4
Because in the continuous improvement of products, if there is difference between this date and technical data, should comply with the technical agreement parameters on both sides. No further notice!